The application of 3D printing in the laryngoscope mold Posted on : March 31, 2022 By GREFEE Medical care used tools have rigorous requirements on accuracy. Thus, it has higher requirements for the accessories production of medical used machines. In the production of the accessories of medical devices, there is no tolerance for the surface quality, […]
The application of 3D printing in the laryngoscope mold Read More »
Before you initiating your new project, you need to know the types of injection molding. Posted on : March 24, 2022 By GREFEE There are many ways to classify the injection molding, in which it is classified into few types according to the difference. (1) classified by the material, there are thermoplastic injection mold and thermosetting
Types of Injection molding Read More »
The Calculation Formulas for Injection Molding Posted on: March 23, 2022, By GREFEE Part 1 Clamping tonnage F (TON) Formula: F=Am*Pv/1000 Clamping tonnage: TON Am: Mold Cavity Projected area: CM2 Filling Pressure： KG/CM2 Generally, the plastic material filling pressure range is 150-350KG/CM2) Good flowability takes bottom values, poor flowability takes top values. Injection
The Calculation Formulas for Injection Molding Read More »
Mold design Tips – Two-Stage Ejecting Structure Posted on : March 24, 2022 By GREFEE Generally, when taking the product out from the mold, no matter it applies a single or multi-parts ejecting structure, the ejection should be finished once. However, due to the specific shaped products or requirements of volume production, a two-stage ejecting structure makes
Mold design Tips – Two-Stage Ejecting Structure Read More »
Causes analysis and improvement methods of shrinkage depression of die casting products Posted on : March 24, 2022 By GREFEE To learn more problems and preventions of die casting, click to check it out. Undercasting Cold Shut Mold Sticking Cracking Flow Marks Deformation Strain Ejector pin Marks Dented Lamination Burrs Shrinkage depression Bulges Deformation Fissure Discolored
Shrinkage depression of die casting products Read More »
Causes analysis and improvement methods of lamination in die casting products. Posted on : March 23, 2022 By GREFEE To learn more problems and preventions of die casting, click to check it out. Undercasting Cold Shut Mold Sticking Cracking Flow Marks Deformation Strain Ejector pin Marks Dented Lamination Burrs Shrinkage depression Bulges Deformation Fissure Discolored Mottles Bubbles
Lamination in die casting products. Read More »
